00181308_0
VSD35-3-AZ

Black air control elements

00190407_0
Wall installation


00173291_0
Angled one-way air discharge and extract air


00181308_0
00190407_0
00173291_0

VSD35-3-AZ

Ventilation and extract ventilation combined in one casing

Slot diffusers with 35 mm nominal width, used as supply and extract air combination

  • Nominal length from 600 to 1200 mm, 3 slots
  • Volume flow rate range 8 – 40 l/s or 30 – 144 m³/h
  • Diffuser face made of extruded aluminium sections
  • For variable and constant volume flows
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Individually adjustable air control elements to meet individual local requirements


Optional equipment and accessories

  • Exposed diffuser face available in RAL CLASSIC colours
  • Damper blade for volume flow rate balancing, can be adjusted through the diffuser face
  • Acoustic lining that ensures very good transmission loss
  • Screw fixing
  • End angles, fixing brackets

Application

Application

  • Type VSD35-3-AZ slot diffusers are used as supply and extract air combinations in comfort zones
  • Angled one-way air discharge for turbulent flow (mixed flow ventilation)
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • For variable and constant volume flows
  • For supply air to room air temperature differences from –10 to +10 K
  • For room heights up to 4 m (lower edge of suspended ceiling)
  • For horizontal installation into walls and bulkheads

Special characteristics

  • Individually adjustable air control elements to meet individual local requirements
  • High induction results in a rapid reduction of the temperature difference and airflow velocity
  • Diffuser face has been optimised for maximum volume flow rate at low sound power levels
  • Suitable for continuous linear arrangement

Nominal sizes

  • LN: 600, 750, 900, 1050, 1200 mm

Description

Variants

  • VSD35-3-AZ-...: supply and extract air combination without acoustic lining (cross talk reduction)
  • VSD35-3-AZ-...-ZT: Supply and extract air combination with acoustic lining (cross talk reduction)
  • VSD35-3-AZ-...: Black air control elements
  • VSD35-3-AZ-.../WW: White air control elements


Plenum box and diffuser face fixing

  • AK: Plenum box with rigid fixing
  • AS: Plenum box with screw fixing

Parts and characteristics

  • Diffuser face with individually adjustable air control elements
  • Plenum box for horizontal duct connection
  • Screw fixing (facilitates installing the diffuser face) or screw fixing

Attachments

  • Damper blade for volume flow rate balancing
  • End angle

Accessories

  • Lip seal
  • Fixing brackets

Construction features

  • Spigot suitable for circular ducts to EN 1506 or EN 13180
  • Spigot with groove for lip seal (if accessory lip seal has been ordered)

Materials and surfaces

  • Diffuser face made from extruded aluminium sections
  • Air control elements made of plastic, UL 94, V-0, flame retardant
  • Plenum box and fixing brackets made of galvanised sheet steel
  • End angle made of aluminium
  • Lip seal made of rubber
  • Acoustic lining of the cross-talk attenuator is mineral wool
  • Diffuser face with anodised finish, E6-C-0, natural colour
  • P1: Powder-coated, RAL CLASSIC colour
  • Air control elements similar to RAL 9005, black
  • WW: Air control elements similar to RAL 9010, white


Mineral wool

  • To EN 13501, fire rating class A1, non-combustible
  • RAL quality mark RAL-GZ 388
  • Biosoluble and hence hygienically safe according to the German TRGS 905 (Technical Rules for Hazardous Substances) and EU directive 97/69/EC
  • Faced with glass fibre fabric as a protection against abrasion through airflow velocities of up to 20 m/s
  • Inert to fungal and bacterial growth

Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to EN ISO 5135

Maintenance

  • Maintenance-free as construction and materials are not subject to wear
  • Inspection and cleaning to VDI 6022

Downloads

product information

brochures

certificates

operation manuals

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)