EN3_300x200_3d_01psd.png
CAV controllers

EN (Generation 3) with actuator

EN_gc_sv_Detail_01.psd.png

Visual display of the damper blade position

EN3_300x200_3d_02.psd.png
CAV controllers

Actuator for switching between setpoint values or steady operation

EN3_500x400_3d_02.psd.png
CAV controllers

Large dimensions as double version

doc_graphic_000009.png
Tested to VDI 6022

Conforms to VDI 6022

EN3_300x200_3d_01psd.png
EN_gc_sv_Detail_01.psd.png
EN3_300x200_3d_02.psd.png
EN3_500x400_3d_02.psd.png
doc_graphic_000009.png

EN  

For precise control of normal to high constant volume flow rates

Rectangular, mechanically self-powered air terminal units for supply and extract air systems with constant air volume flows


  • Suitable for volume flow rates up to 12600 m³/h or 3500 l/s
  • Volume flow rate adjustment from outside by rotary knob
  • Easy retrofitting of an actuator for volume flow setpoint adjustment
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Casing air leakage to EN 1751, class C
  • Visual display of the damper blade position for operating point optimisation

 


Optional equipment and accessories


  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type TX for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WT for reheating the airflow
  • Actuator for setpoint value switching or steady operation

General information

Application

  • Rectangular CAV terminal units for supply or extract air volume flow control in constant volume flow systems
  • Mechanical self-powered volume flow control without external power supply
  • Simplified project handling by ordering based on nominal size


Special features

  • Setting of the volume flow setpoint from the outside by rotary knob
  • High control accuracy of the set volume flow rate
  • Correct operation even under unfavourable upstream conditions
  • Visual display of the damper blade position for operating point optimisation
  • Easy retrofitting of an actuator for volume flow setpoint adjustment


Nominal sizes

  • 19 nominal sizes from 200 × 100 – 600 × 600 mm



Variants

  • EN: Air terminal units
  • EN-D: Air terminal units with acoustic cladding
  • Air terminal units with acoustic cladding and/or secondary silencer type TX for high acoustic requirements


Construction



  • Galvanised sheet steel
  • P1: Powder-coated, silver grey (RAL 7001)



Parts and characteristics

  • Air terminal unit ready for commissioning
  • Damper blade with low-friction bearings
  • Bellows for vibration damping
  • Cam plate with leaf spring
  • Rotary knob pointer and scale for adjusting the flow rate setpoint
  • Each air terminal unit is tested in the factory on a special ventilation test rig
  • Visual display of the damper blade position for operating point optimisation


Attachments

  • Min/Max actuators: Actuators for switching between minimum and maximum volume flow rate setpoint values
  • Variable actuators: actuators for variable volume flow or for switching volume flow setpoints
  • EN with actuator only up to H = 300 mm



Useful additions

  • Secondary silencer Type TX
  • Heat exchangers Type WT



Construction features

  • Rectangular casing
  • Flanges on both ends, suitable for duct connections
  • Air terminal units from H = 400 mm as double version (2 dampers with separate setting scales)
  • Acoustic cladding cannot be retrofitted


Materials and surfaces

Galvanised sheet steel construction



  • Casing and damper blade made of galvanised sheet steel
  • Leaf spring made of stainless steel
  • Polyurethane bellows
  • Plain bearings with PTFE coating
  • Cam plate and adjusting unit made of galvanised sheet steel


 



Powder-coated construction (P1)



  • Casing and damper blade made of galvanised sheet steel, powder-coated
  • Leaf spring made of stainless steel
  • Polyurethane bellows
  • Plain bearings with PTFE coating
  • Cam plate and adjusting unit made of galvanised sheet steel


 



Variant with acoustic cladding (-D)



  • Acoustic cladding made of galvanised sheet steel
  • Rubber seal for the insulation of structure-borne noise
  • Lining made of mineral wool


 



Mineral wool



  • Acc. to EN 13501, fire rating class A1, non-combustible

  • RAL quality mark RAL-GZ 388

  • Non-hazardous thanks to high biosolubility according to the German Ordinance on Hazardous Substances and Note Q of the European Regulation (EC) No. 1272/2008


Standards and guidelines

Meets the hygiene requirements of



  • EN 16798, Part 3
  • VDI 6022, Sheet 1
  • DIN 1946, Part 4
  • For further standards and guidelines, please refer to the hygiene certificate



Casing air leakage



  • EN 1751, Class C


Maintenance

Maintenance-free as construction and materials are not subject to wear



DOWNLOADS

product information

  • Constantflow-Volume-Flow-Controllers-Type-EN-9.1_en_8.pdf

    EN_PD_2021_06_30_DE_de--1- 1,9 MB pdf

  • EN Product data sheet

    EN_PD_2023_06_07_DE_en 500 KB pdf

certificates

  • EN_HC_2020_06_08_DE_enpdf.pdf

    690 KB pdf

  • Declaration of conformity or declaration of incorporation Type EN

    Declaration of conformity or declaration of incorporation 93 KB pdf

  • Declaration of incorporation Type EN

    Declaration of incorporation 61 KB pdf

operation manuals

  • Installation manual Type EN

    EN_IM_A00000074510_V4_2023_05_GB_en Installation manual 1,1 MB pdf

References

Hypercube - Moscow

  • Description
Project:
- Hypercube

Field of application:
- Office Building
 
Location:
- Moscow, Russia 
 
TROX-Products:
- Air-water-Systems: Multi-Service-Chilled-Beams, DID312, DID632
- Air diffusor: SL-A, TRS
- Acoustics: CA, MSA
- Control Units: TVJD-Easy, EN-D, VFR

TROX Services

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings