Functional description
The sash distance is recorded with a draw wire that is linked to the sash movement. The output signal is proportional to the sash distance. The sensor can be used only with vertical sashes.
DS-TRD for fume cupboard control – linear control strategy
DS-TRD for fume cupboard control – safety-optimised control strategy
Supply voltage | 12 V DC from the controller |
Measuring range | 0 – 1750 mm or 350 – 2100 mm |
Measurement accuracy | ± 0.25 % of the reading |
Actual value signal output | 0 – 10 V DC, 0.5 mA max. |
Operating temperature | –20 to 40 °C |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 40 |
EC conformity | EMC according to 2004/108/EC |
Electronic sash distance sensor for the EASYLAB system, used to capture the sash distance of fume cupboards.
Suitable for sashes with 1750 mm maximum opening.
The sash distance is measured using a draw wire. A 0 – 10 V DC voltage signal that is proportional to the sash distance is emitted. If the sensor is connected to a fume cupboard controller, the volume flow is controlled based on demand.
Simple installation in several installation positions on the fume cupboard; simple linking to the sash movement.
Special characteristics
Materials and surfaces
Technical data
Installation and commissioning
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)
Contact
We are here for you
Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)