00131938_0
Shut-off damper, variant AK, with actuator


00132715_0
Tested to VDI 6022


00132820_0
Variant for manual operation


00131938_0
00132715_0
00132820_0

AK 

For low-leakage shut-off

Circular shut-off dampers for shutting off volume flows in ventilation ducts of air conditioning systems

  • Maintenance-free damper blade mechanism
  • Closed blade air leakage to EN 1751, up to class 4
  • Casing air leakage to EN 1751, class C

Optional equipment and accessories

  • Electric actuator
  • Spring return actuator
  • Pneumatic actuator
  • Auxiliary switch with adjustable switching points for capturing the end positions

General information

Application

  • Circular shut-off dampers Type AK for shutting off or restricting the airflow in ventilation ducts of air conditioning systems

Special features

  • Damper blade can be actuated manually, electrically or pneumatically
  • Low-leakage shut-off
  • Safety function provided by optional spring return actuator

Nominal sizes

  • 100, 125, 160, 200, 250, 315, 400


Variants

  • AK: Shut-off damper
  • AK-FL: Shut-off damper with flanges on both ends

Construction

  • Galvanised sheet steel
  • P1: Powder-coated, silver grey (RAL 7001)
  • A2: Stainless steel

Parts and characteristics

  • Ready-to-install shut-off damper
  • Damper blade with blade mechanism

Attachments

  • Open/Close actuators: For the opening and closing of shut-off dampers in air conditioning systems
  • Auxiliary switch for capturing the end positions

Accessories

  • Lip seals on both ends (factory fitted)
  • Matching flanges for both ends


Materials and surfaces

Galvanised sheet steel construction

  • Casing and damper blade made of galvanised sheet steel
  • Blade seal made of TPE plastic
  • Bearings made of TPU


Powder-coated construction (P1)

  • Casing made of galvanised sheet steel, powder-coated
  • Damper blade made of stainless steel 1.4301
  • Shaft made of stainless steel 1.4305


Stainless steel construction (A2)

  • Casing and damper blade made of stainless steel 1.4301
  • Shaft made of stainless steel 1.4305

Standards and guidelines

  • Meets the hygiene requirements of VDI 6022
  • Closed blade air leakage to EN 1751, class 4 (nominal sizes 100, 125 and 160, class 3)
  • Nominal sizes 100, 125, and 160 meet the general requirements, nominal sizes 200 – 400 meet the increased requirements of DIN 1946, part 4, with regard to the acceptable closed blade air leakage
  • Casing air leakage to EN 1751, class C

Maintenance

  • Maintenance-free, as construction and materials are not subject to wear and tear

Technical information

  • Function
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
AK: schematic representation 00137312_0
① Damper blade
② Lip seal
③ Casing
④ Actuator


Functional description

For airtight shut-off of volume flows in round air ducts. The basic version is shut off by manually actuating the damper blade. Electrically or pneumatically operated actuators, which are available in different versions, can also be used to operate the damper blade. The versions differ with regard to the power supply and safety position (de-energised or de-pressurised state). Actuators with auxiliary switches for electrical monitoring of the damper blade position are also available.

The actuator of a damper blade must be controlled by a customer-side circuit and then moves the damper blade to the OPEN or CLOSED position.

Nominal sizes

100 – 400 mm

Acceptable static differential pressure

1500 Pa

Operating temperature

10 – 50 °C


This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme


Circular shut-off dampers for shutting off or restricting the airflow in ventilation ducts of air conditioning systems, for supply air or extract air, available in 7 nominal sizes Suitable for duct pressures up to 1500 Pa.

Ready-to-install unit consists of the casing with a damper blade.

Spigot with groove for lip seal, suitable for connecting ducts according to EN 1506 or EN 13180. Position of the damper blade indicated externally at the shaft extension.

Closed blade air leakage to EN 1751, class 4 (nominal sizes 100, 125 and 160, class 3). 

Casing air leakage to EN 1751, class C.

Special features

  • Damper blade can be actuated manually, electrically or pneumatically
  • Low-leakage shut-off
  • Safety function provided by optional spring return actuator

Materials and surfaces

Galvanised sheet steel construction

  • Casing and damper blade made of galvanised sheet steel
  • Blade seal made of TPE plastic
  • Bearings made of TPU


Powder-coated construction (P1)

  • Casing made of galvanised sheet steel, powder-coated
  • Damper blade made of stainless steel 1.4301
  • Shaft made of stainless steel 1.4305


Stainless steel construction (A2)

  • Casing and damper blade made of stainless steel 1.4301
  • Shaft made of stainless steel 1.4305

Construction

  • Galvanised sheet steel
  • P1: Powder-coated, silver grey (RAL 7001)
  • A2: Stainless steel

Technical data

  • Nominal sizes: 100 – 400 mm
  • Acceptable static differential pressure: 1500 Pa

Sizing data

  • qᵥ [m³/h]

Air-regenerated noise

  • LPA [dB(A)]

This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.

AK–P1–FL/160/G2/BP0/NO
|||||||
1234567
1 Type
AK Shut-off damper


2 Material
No entry: galvanised sheet steel
P1 Powder-coated RAL 7001 (silver grey)
A2 Stainless steel


3 Construction
No entry: standard construction
FL Flanges on both ends


4 Nominal size [mm]
100, 125, 160, 200, 250, 315, 400


5 Accessories
No entry: without accessories
D2 Double lip seal both ends
G2 Matching flanges both ends


6 Actuator
No entry: Shut-off damper, manually adjustable

Open/Close actuators
B30 24 V AC/DC, 3-point
B32 24 V AC/DC, 3-point, with auxiliary switch
B40 230 V AC, 3-point
B42 230 V AC, 3-point, with auxiliary switch
Open/Close actuators
BP0 24 V AC/DC, spring return
BP2 24 V AC/DC, spring return, with auxiliary switch
BR0 24 - 240 V AC, 24 - 125 V DC, spring return, with safe position
BR2 24 - 240 V AC, 24 - 125 V DC, spring return, with auxiliary switch, with safe position

Modulating actuators
B20 24 V AC/DC, modulating, 2 – 10 V DC
B22 24 V AC/DC, continuous 2 - 10 V DC, with auxiliary switch
Pneumatic actuator with safe position
TN0 Pneumatic actuator 0.2 – 1 bar


7 Damper blade position
Only with spring return actuator or pneumatic actuator
NO power off/pressure off to OPEN (Normally Open)
NC power off/pressure off to CLOSE (Normally Closed)


Downloads

product information

  • Product data sheet Type AK

    AK_PD_2024_09_10_DE_en Product data sheet 830 KB pdf

certificates

  • Declaration of conformity or declaration of incorporation Type AK

    Declaration of conformity or declaration of incorporation 94 KB pdf

  • Declaration of hygiene conformity Type AK

    AK_HC_2024_05_DE_en Hygiene certificate 1,9 MB pdf

  • Environmental product declaration AK

    AK_EPD_2024_11_DE_en Environmental product declaration 1,1 MB pdf

operation manuals

  • Assembly and operating manual AK

    AK_IOM_CD10037_V1_2023_12_GB_en Assembly and operating manual  1,2 MB pdf

TROX Services

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings