Air grilles

Product Finder

layer

ASW

Hit and miss damper with airflow straighteners

  • Nominal sizes 225 × 75 to 1225 × 325 mm
  • Perimeter angle section frame

read more

layer

AF / AH

Single ventilation grilles and horizontal run sections with special profiled blades

  • Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border suitable for floor installation without an installation subframe
  • Removable grille core with special spring clip fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for volume flow rate balancing and air direction control

read more

layer

DGW

Damper units with opposed action blades and blades for air direction control

  • Nominal sizes 225 × 75 – 1225 × 525 mm
  • Perimeter angle section frame

read more

layer

TRS

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 to 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of sheet steel, powder-coated
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Grille face made of galvanised sheet steel, without powder coating
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing

read more

layer

AGW

Damper units with opposed action blades

  • Nominal sizes 225 × 75 – 1225 × 525 mm
  • Perimeter angle section frame

read more

layer

AWT

Ventilation grille with special profiled blades (rectangular cross section)

  • Nominal sizes 325 × 125 – 1225 × 325 mm
  • Volume flow rate range 17 – 950 l/s or 61 – 3420 m³/h
  • Grille face made of aluminium with anodised finish
  • Tested for installation in gymnasiums
  • Front border with countersunk holes, 30 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe

read more

layer

X-GRILLE modular


Individual design and simple configuration with more than 3000 variants

  • Various designs allow installation from representative areas to warehouses
  • Quick and simple installation under normal structural conditions through 6 mounting variants
  • Air diffuser for supply and extract air with extensive dimensional variance
  • Mesh band installation possible through special end and middle sections
  • Can be combined with familiar TROX attachments 
  • Simple replacement of existing TROX ventilation grilles due to identical dimensions of the installation openings
  • Design programme for technical sizing
  • Data sets for BIM-based project processing

read more

layer

AGS

Ventilation grille with angled blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 4 – 535 l/s or 14 – 1926 m³/h
  • Grille face made of aluminium with anodised finish
  • 30 mm wide front border
  • Countersunk holes


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Matching rear frame for door installation

read more

Please select your disired product properties:
Hit and miss dampers, made of sheet steel, for installation into rectangular ducts ASW

ASW

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts

read more

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs AF

AF / AH

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs

read more

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts DGW

DGW

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts

read more

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades TRS

TRS

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades

read more

Damper units, made of dip coated sheet steel, for installation into rectangular ducts AGW

AGW

Damper units, made of dip coated sheet steel, for installation into rectangular ducts

read more

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades AWT

AWT

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades

read more

X-GRILLE modular

X-GRILLE modular

read more

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades AGS

AGS

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts TRS-K (duct installation)

TRS-K

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts TRS-R (circular duct installation)

TRS-R

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades TR

TR

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades

read more

Ventilation grilles with flat border construction – also for continuous horizontal runs X-GRILLE Basic

X-GRILLE Basic

Ventilation grilles with flat border construction – also for continuous horizontal runs

read more

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)