00132826_0
X-GRILLE-Basic


00117159_0.
Flat border construction


00132826_0
00117159_0.

X-GRILLE BASIC 

Ventilation grilles with flat border construction – also for continuous horizontal runs

The new X-GRILLE Basic ventilation grilles with their gently sloped border combine function with an attractive design; they can be installed in walls, sills or rectangular ducts.

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 19 – 2651 l/s or 68 – 9544 m³/h
  • Energy-efficient and acoustically optimised air discharge
  • Symmetric blade profile for two-way entry flow
  • Uniform look and easy adjustment due to concealed blade linkage
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs
  • Use of existing rear assemblies
  • Easy replacement of existing grilles due to standard installation dimensions


Optional equipment and accessories

  • Installation subframe

  • Attachments for volume flow balancing and air direction control
  • Concealed screw fixing with and without installation subframe


General information


Application

  • Ventilation grille of Type X-GRILLE Basic as supply air or extract air variant for comfort zones and industrial zones
  • Attractive design element for building owners and architects with demanding aesthetic requirements
  • Directed supply air discharge for mixed flow ventilation
  • Blades are adjustable to meet different local requirements
  • For variable and constant volume flows
  • For supply air to room air temperature differences from – 12 to +4 K
  • For installation in walls, sills and rectangular ducts


Special characteristics

  • Symmetric blade profile for two-way entry flow
  • Concealed blade linkage for adjusting the blades simultaneously
  • Gently sloped border construction, almost completely flush with the installation surface
  • Linear look, ideal for continuous horizontal runs


Nominal sizes

Single grille

  • Nominal length: 225, 325, 425, 525, 625, 825, 1025, 1225 mm
  • Nominal height: 125, 225, 325, 425, 525 mm

Horizontal run section

  • Nominal length of end section: 950 – 2025 mm
  • Nominal length of middle section: 2000 mm
  • Nominal height: 125, 225, 325 mm

Other dimensions upon request

Variants

  • Single grille
  • Horizontal run section

Fixing

  • VS: Concealed screw fixing
  • KF: Spring clip fixing
  • VS, KF only with installation subframe


Parts and characteristics

  • Gently sloped border
  • Horizontal blades with concealed linkage to adjust blades simultaneously
  • Vertical centre mullion for nominal lengths over 625 mm
  • Concealed screw fixing and spring clip fixing, optional


Attachments

  • AG, AS, D, DG: For volume flow rate balancing and for air direction control


Accessories

  • Installation subframe: For the fast and simple installation of ventilation grilles


Construction features

  • Only small gap between blades and front border
  • Symmetrically mounted blades


Material and surfaces

  • Front border made of galvanised sheet steel
  • Blades made of aluminium
  • Linkage and end pieces of the blades made of special high-temperature resistant plastic, according to UL 94, V-0, flame-retardant
  • Front border and blades powder-coated RAL 9010, pure white
  • AG attachment: Frame made of sheet steel, blades made of aluminium
  • AS and SAS attachment made of aluminium
  • DG attachment made of sheet steel, black powder-coated
  • P1: powder-coated, RAL CLASSIC colour


Standards and guidelines

  • Sound power level of the air-regenerated noise measured according to DIN EN ISO 5135


Maintenance

  • Low maintenance, as construction and materials are not subject to wear and tear
  • Inspection and cleaning according to VDI 6022

Downloads

product information

certificates

References

Berggasthof Platzlalm - Kaltenbach

  • PROJECT
  • OUR JOB
  • SOLUTION

Hochzillertal – Berggasthof Platzlalm

An air of luxury. There is no reason why a cosy mountain inn should not be every bit as comfortable as a 5-star hotel.

Berggasthof Platzlalm can be found right in the popular ski resort Hochfügen, Hochzillertal, near the alpine road Zillertaler Höhenstrasse. The chalet offers 30 sleeping possibilities, a great sun deck and, for ultimate relaxation: a sauna – all at an altitude of approx. 1,800 metres.

 

Its blend of traditional and modern design creates a pleasant, welcoming atmosphere. It is a place where you simply feel good.

TROX components ensure a comfortable indoor climate

 

TROX components ensure a comfortable indoor climate. Products from the air handling expert, such as swirl diffusers, grilles, disc valves, fire dampers and volume flow controllers, were installed in the mountain inn, for example, in the bar lounge and in the dining and sitting room. Naturally, the installation had to comply with technical requirements for air handling and noise,  but the visible technological elements also had to match the overall visual appearance of the rooms and lounges, characterised by beautiful old wood. The grilles from TROX were perfect for the job.

TROX products in the Hochfügen ski resort

 

Thanks to the installed components from TROX, guests will be comfortable in the inn no matter the temperature outside. Furthermore, the tried and tested fire dampers ensure a high degree of safety. TROX products create an excellent indoor climate and pleasant atmosphere – even in winter and at 1,800 metres!

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Contact

We are here for you

Please specify your message and type of request.
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +60 6 678 8188 | Fax: +60 6 678 8288 (388)